Pipe Sewer
At this point, the facility should be complete installation drawings for installed equipment, the availability of fasteners mounting frames on inline sanitary ware, heated towel rail. The next stage - setting the plumbing. This work is before the finish lacquered parquet. The most common material for water supply - it's PVC. It is convenient for installation, requires no welding, no deposits of plaque on the walls of the tubes. Manufacturer manufacturer provides a guarantee for these Pipe 80 years of operation, but, unfortunately, no statistics on this stuff, because it is quite new.
Also used copper pipes, which are characteristics similar to plastic, but they have statistics on the operation. The cost of copper tubing and component parts is about 1.5 times higher than for PVC. Sewer PVC conduit. Plumbing work at the facility are among the most expensive, because These works belong to the Hidden category and the cost of failure is very high. Very often the customer insists on the 'wrong' alignment of plumbing fixtures for the sake of design space or unwillingness to contemplate the toilet at the entrance to the bathroom, although this premise is isolated and can not be regarded as open or as part of any premises.
Because of this we have to construct various stages, pumps and other tricks to not violate the laws of physics and to prevent water from WC went into the main sewer riser, but not in a bidet, which by design solution is below the toilet and close to the main sewer standpipe. Sometimes you should consider what is best: the normal functioning plumbing or subjective view on the design of bathrooms. Very often, if not placing too much plumbing and sewer routes is clogging the pipes, which at this arrangement very difficult to clean. Painting works Painting works begin with plaster walls. In choosing the material for plaster must decide what kind of finish is on the wall (paint, wallpaper, decorative plaster or others).