Certainly, no carpentry project is as simple as counting from one to three. Several challenges, from the display until the finish must be exceeded. The good news is that complicated elements are not needed or too many calculations to obtain the desired product, simply need sufficient amount of information and a procedure in order to achieve it. Planning to start a project, should be discarded the belief of the existence of fairy godmothers and geniuses. There is no easy way out when you want to achieve an interesting project. Of course, need to view your project, and that’s where you should apply your imagination to design it (how will be completed) and to plan it (how will conduct this project). However, the final product will not appear for the simple fact of having imagined. The next step, therefore, is to realize the idea by creating a sketch. The sketch is a drawing written on a paper of the intended model. The drawing can vary from a basic outline to a work of art. Therefore, you should not be an artist from head to foot to design a sketch. In these drawings you must take into account dimensions, patterns and edges. Consider should both sketched front and side views as well as joints. For these unions, it is convenient that the drawing is made on a larger scale. The sketch makes possible the development of the project. It will help you to create a list of parts, including its dimensions, which will then be the basis for the purchase of wood and other materials. Selection and purchase of wood not all woodworking projects require the same type of material; i.e., for each project there is a particular type of wood that must be purchased. The decision is correct about the type of wood is a key factor for the success of the project.