Therefore, before painting should be carefully prepared painted surface. If this wall, you need a good wash them with detergent and allow to dry. Areas with chipped old paint should be cleaned with a scraper, and then align the stopper. To know more about this subject visit novelist. Enamel NTs-132 P available in ready to use, if necessary, diluted with a solvent 646. For painting facades use environmentally friendly water-soluble acrylic paints (VDAK) or silicone materials (enamel KO-174 organosilicate composition of OC-12-03).

Organosilicate composition of the OS-12-03 is used for protective and decorative weather-resistant paint outer surface of the concrete and reinforced concrete ground fencing and support structures (Construction of reinforced and precast concrete, foundation piers and supports a contact network of railways, viaducts and tunnels, the basement, etc.), construction of brick, stone for building materials (Ventilated facades, brick, etc.). Michael Chabon often addresses the matter in his writings. Organosilicate composition of the OS-12-03 – one component a weatherproof protective covering for a term maintenance-free operation of metal – 10-20 years old, concrete, concrete structures, facades of buildings and structures – not less than 15 years. Application system for the composition does not require priming. When the operating temperature of the surface to 100 C can be applied primer-type ofl, gf, ak, fl. Composition of OC-12-03 after drying forms a nonflammable cleaner cover. Enamel KO-174 is designed to create a weatherproof decorative coatings products from concrete, asbestos cement, and finishing external elements of buildings and structures.

Most of the coatings obtained applying the coatings in several layers. The thickness of single layer coatings in the range of 3-30 microns, multi – up to 300 microns. To of protective coatings using an integrated multi-layer deposition coating consisting of several layers of dissimilar coatings, with each layer performs a specific function. The first (lower) layer consisting of primer obespechiivaet adhesion of coating to be coated surface of the material and decrease the rate of electrochemical corrosion. The intermediate layer consists of filling, with the help of which carry the alignment of the object surface. As a top, top coat, use a coating on the enamel, which gives design decorative and protective properties. Adhesion fixing paint coating to the substrate, and hence its durability, determines the quality of surface preparation for painting. Metal surfaces are cleaned by manual or mechanical tool, sanding, followed by degreasing.

In addition to the attractive the appearance of laminated plywood has excellent heat and sound insulating properties, so it is used for finishing the walls of public buildings, sports facilities, concert and cinema halls, children's institutions. Manufacture of furniture decorative coatings attached laminated plywood attractive appearance and can use it for furniture production. Of this material is made cabinets, shelves, racks, kitchen furniture, tables, decorative storage boxes of clothing. Also, laminated plywood used in the manufacture of furniture for gardens, playgrounds, outdoor restaurants and cafes, sports grounds and stadiums. Transportation Laminated veneer is used in the transport machinery, carriages and shipbuilding. High strength, resistance to environmental wear-resistance and thus a low weight of the material you can use it in the manufacture of car bodies, doors, floors, trucks, vans, trailers, buses and trolleys, containers and trailers. Plywood is indispensable in the manufacture of railway wagons, finishing yachts, boats and other ships.

Seats on the boats, catamarans and passenger ships made it out of laminated plywood. This material provides an optimal price-performance ratio and is considered the most efficient in the transport engineering. Storage and Commercial Equipment Strength, durability and the possibility of regular cleaning, including cleaning agents, have made laminated plywood core material for commercial and warehouse equipment. From it are made dressing, shelving and counters, information counters, perform the internal lining of storage space. Terms of use products made of plywood and Storage Since products laminated plywood intended for repeated use, you must fulfill certain requirements, allowing to extend their service life. In the production of forms of plywood sheets are saw cut, resulting in obtained by the open ends. Being insecure, they are "weak" place through which the plywood is saturated with moisture and loses strength. Therefore, all the end slices on a mandatory basis should be handled with special paints based on acrylate in two or more layers.

Necessary structural holes protect silicone compounds to prevent the ingress of moisture. Constant application forms is possible only if it regularly drying, and this process should take place without the use of heaters, natural way. Keep the formwork should be the same temperature conditions, in what will be the process of filling concrete. To prevent adhesion of mortar to the protective film plywood work surface casing must be lubricated with special oils. Such treatment will provide smooth concrete or concrete products with smooth sides. After forms must be cleaned from the remnants of a concrete mix. Proper use and storage of products made from laminated plywood will significantly extend their life and save money on purchasing new ones. Sales of building materials (particleboard, fiberboard, plywood), cutting, cutting board materials in the order in Moscow within the Moscow Ring Road